The VRM oil change system adapts to any oil pan or sump on vehicles and machines where used liquids must be drained :
The VRM oil change system is used
on a variety of vehicles and machines.

For a new application :
On the future user's questions, the research and design department validates the use of the system on a new category of vehicle or machine by testing.

The integration of the VRM System :
The technicians study integrating it into new equipment on the basis of specifications. This is the description of the future technical environment, the conditions of the oil change and the products concerned.
From this study, VRM designs and manufactures the new plug that will offer the same advantages as the standard VRM plug.

The VRM oil change system,
The custom-made system for oil draining and filling.
Le système Vrm ? efficace et propre !

Un gain de temps prouvé :
Deux opérations : la vidange et le remplissage se font en seulement 3 minutes 30 secondes :
- pas de bouchon à dévisser et à revisser,
- pas de joint à changer,

La vidange devient un service immédiat, sans rendez-vous, l’huile bouillante n’est plus un handicap.

Un atelier de travail propre et moderne :
L’aspiration avec une parfaite étanchéité se fait
sans aucune salissure. Le risque de brûlure par éclaboussure est écarté. L’environnement du poste de travail se maintient propre, moderne, respectueux de l’écologie.

Une relation clientèle durable.
Le professionnel équipé du système VRM communique sur une vidange efficace : nettoyage du carter par l’aspiration, filetage du carter sauvegardé.
Son client apprécie la rapidité d’un service à l’efficacité accrue et n’hésite pas à revenir.
An oil change with VRM :

A very inventive valve-plug:
As soon as the adapter is connected,
the VRM valve-plug is placed in
the open position.
Draining starts.

An oil pan cleaning effect:
The engine oils or other used liquids
are sucked out via a double-diaphragm
pneumatic pump.

Clean room cleanness:
The used oil or liquid
passes directly from the engine oil pan
to the container


Traditional oil change
by gravity

VRM oil change system
with cleaning effect

The VRM valve-plug replaces the traditional plug. It adapts to any type of vehicle without unscrewing or re-screwing.

The liquid is completely drained:
Owing to its design, the valve-plug is located at the lowest point and does not exceed the internal thread of the oil pan.

It presents a high resistance throughout time to hydrocarbons and heat: its body is made of bichromate-zinc-plated steel to automobile standards, its spring is made of stainless steel. The gasket has been specifically designed.

From the plug to the gasket, each component in the VRM System has been subjected to specific studies.
Their use is protected by several international patents.


The drain plug has been successfully tested by UTAC (Automobile Motorcycle and Cycle Technical Union).

The VRM products were awarded the Prize for Innovation in 1995.

Several large automobile manufacturers have approved the VRM Concept.


VRM System is a registered trademark of VRM S.A..




VRM plug correspondence table
Click to consult the list.
The main automobile manufacturers have adopted the VRM System :

Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Honda, Mazda, Nissan, Opel, Peugeot, Renault, Rover, Seat, Skoda, Suzuki, Vag, Volvo...

The engineering departments of public organisations or companies use the VRM system in their maintenance equipment for their vehicle fleet and machines.